Aerospace & Space Engineering

We bring computational engineering expertise proven in technically complex industrial applications. We build on established methods, material models and validation procedures that we can adapt to the specific requirements of the aerospace and space sectors.

Key Aerospace Capabilities

Proprietary Material Models

Calibrated using physical tests conducted in our own laboratory rather than taken from generic material libraries. Non-linear material models, composites and rubber-like (hyperelastic) materials.

From CAD to Certification

A complete workflow from design concept to certification documentation — in line with European EASA CS-25 regulations, US FAA FAR 25 and ECSS standards for space projects.

30 Years of Experience

Three decades of automotive development expertise applied to the aerospace and space sectors – with the same rigorous standards of accuracy and traceable results.

Active ESA Projects

Engineering partner in the development of rocket propulsion components for the JARMIL EPC-2K project for the European Space Agency.

Computational Engineering Disciplines in Detail

We have developed our expertise in each of the following disciplines through projects for the automotive and mechanical engineering industries, where meeting deadlines, accuracy and verifiable results are critical to success. Today, we apply the same methods, tools and validation procedures to aerospace and space engineering. For each discipline, we outline its specific applications in aeronautical and space engineering projects.

.

FEA / Structural Analysis

Analysis of stresses, deformations, stiffness and limit states of components, assemblies and load-bearing structures.

Application in Aerospace / Space

  • Aircraft and spacecraft structures
  • Brackets
  • Frames
  • Covers
  • Mechanical Assemblies
  • Operational and test loads

CFD / Flow and Thermal Analysis

Simulation of fluid flow, cooling, temperature fields and interactions between fluid flow and structural components.

Application in Aerospace / Space

  • Thermal management

  • Electronics cooling

  • Flow in piping systems

  • Aerothermal loads

  • Flow environment around components

MBS / Multibody Dynamics

Analysis of the motion, loads and dynamic behaviour of complex mechanical systems, including flexible bodies, contacts and constraints between components.

  • Mechanisms, drive systems and positioning systems.

  • Flexible multibody models and FEM-MBS co-simulation.

  • Non-linear dynamics, contact interactions and force transmission.

  • Structural assemblies, transmission mechanisms and systems subject to demanding dynamic loads.

Application in Aerospace / Space

  • Mechanisms

  • Drive systems

  • Positioning Systems

  • Rotating systems and transmission mechanisms

Gear Mechanisms, Contact and Rotor Dynamics

Analysis of contact pressures, gear mesh loads, contact problems, friction, bearings and mechanical joints. Rotor dynamics, including the generation of gear-induced vibrations and their transmission.

Application in Aerospace / Space

  • Gear Pumps

  • Gearboxes

  • Actuators

  • Gears

  • Drive mechanisms for aerospace and space applications

Vibration and Dynamic Response Analysis

Analysis of dynamic behaviour, natural frequencies, excitation and the response of structures or mechanisms.

Application in Aerospace / Space

  • Launch-induced vibration loads

  • Operational vibration loads

  • Transport

  • Testing

  • Component Integration

Material Models

Development, calibration, and validation of material models based on experimental data for numerical simulations.

  • Plastics, composites and special materials.

  • Elastic, plastic, viscoelastic, creep, and dynamic material models.

  • Consideration of temperature dependence, strain-rate effects and non-linear behaviour.

  • Preparation of material cards for FEA and multiphysics simulations.

Application in Aerospace / Space

  • Composites

  • Plastics

  • Special Materials

  • Thin-walled structures

  • Environments with demanding loading scenarios.

Optimization and Sensitivity Analyses

Parametric studies, sensitivity analyses and design optimisation aimed at improving the performance, weight, service life and reliability of engineering systems.

  • Topology, shape and parametric optimisation.

  • Sensitivity analyses and identification of key design parameters.

  • Multi-objective optimisation of structures and mechanisms.

Application in Aerospace / Space

  • Weight reduction

  • Increasing stiffness

  • Service life optimisation

  • Mitigation of critical conditions

  • Design margins

AI-Assisted CAE and Metamodels

The use of AI/ML, Gaussian processes, and surrogate models to accelerate computationally intensive simulations.

Application in Aerospace / Space

  • Faster evaluation of design variants

  • Prediction of complex system behaviour

  • Reducing Computation Times for Large-Scale Design Studies

Validation and Correlation with Experimental Data

Comparison of numerical results with experimental measurements or operational data, followed by model adjustment based on the observed real-world response.

Applications in Aerospace / Space

  • Model Validation Before a Design Decision

  • Integration with testing

  • Measurements

  • Validation activities across the group

CAE Workflow Automation and DoE

We develop our own software tools to automate CAE workflows — from model preparation and the generation of simulation variants through the integration of FEM/MBS tools to results evaluation, Design of Experiments (DoE) and optimisation tasks.

What LENAM Brings to Aerospace and Space Engineering

Selected engineering challenges that we most frequently address for aerospace and space applications. For each, we specify the software used; our simulations are supported by proprietary material models calibrated against tests conducted in our own laboratory.

Aerodynamics and External Flow

Computational fluid dynamics (CFD) simulations for both subsonic and supersonic flow regimes. We calculate loads on lifting and control surfaces, analyse lift, drag and pressure distribution, and optimise wing and aerofoil geometry.

Software:

  • OpenFOAM
  • Cradle

Impact and Bird Strike

Simulation of high-velocity impacts — for example, a bird strike on an aircraft antenna radome at a speed of 670 km/h. Numerical simulation can replace physical testing during the early stages of development and supports compliance with the EASA CS-25 requirements for bird-strike resistance of relevant aircraft structures, including cockpit areas and leading edges.

Software:

  • PAM Crash
  • Dytran

Aeroelasticity and Flutter

Analysis of fluid–structure interaction (FSI). We predict and help prevent flutter and potentially hazardous resonance in critical aircraft structures in accordance with EASA CS-25 and FAA Part 25 requirements.

Software:

  • OpenFOAM

Gear Pumps

Gear pump simulations combine fluid flow analysis with the mechanical response of the structure to investigate the interactions between pump geometry, operating conditions and resulting efficiency. CFD simulations are used to evaluate pressure and velocity distributions, internal leakage, hydraulic losses and the risk of cavitation. Mechanical analyses assess the deformation and stresses of individual components and their effect on functional clearances and operational reliability.

Software:

  • OpenFOAM
  • ADAMS

s3
s3
s1
s2
previous arrow
next arrow

Thermal and Structural Analysis

Simulation of thermomechanical problems involving heat dissipation and heat transfer, where the resulting temperature changes may cause dimensional changes due to thermal expansion and potentially induce structural stresses. Examples include stresses in printed circuit boards (PCBs) caused by overheating electronic components, as well as non-uniform thermal loading of structures under space environment conditions.

Software:

  • MSC Nastran
  • MSC Marc
  • Abaqus
  • OpenFOAM

Projects We Are Part Of

JARMIL Rocket Engine: EPC-2K

LENAM is a member of the consortium developing the JARMIL rocket propulsion system under the fourth call of the European Space Agency (ESA). Within the project, we provide numerical simulations, structural and thermal analyses, and verification of the behaviour of key engine components under critical operating conditions.

The JARMIL propulsion system delivers a significant increase in combustion chamber pressure through a novel cycle using electrically driven gear pumps. The solution enables a high specific impulse while providing further potential for increased performance and reusability of the entire system.

EPC-2K is a part of the project focused on the development of an electrically driven gear pump. Within the consortium, we provide technical coordination, design support and development activities. We collaborate on the project with AUREL, the Faculty of Mechanical Engineering at TUKE and its PaIC prototyping centre, as well as Stellar Exploration and Inpraise Systems.

Certification Standards

EASA CS-25/23 European airworthiness certification specifications
14 CFR Part 25 US airworthiness regulations (FAA)
ECSS-E-ST-32 ECSS structural engineering standard for space projects

Simulation Tools

  • PAM-CRASH
  • ABAQUS
  • ANSA
  • OpenFOAM
  • MSC Nastran
  • META
  • + Proprietary Material Models

 

Contact

Tell us how we can help. 

During an initial, no-obligation technical consultation, we will discuss your requirements and recommend the most suitable way forward.

Ing. Robert Stoff-Riegel

Ing. Robert Stoff-Riegel

Aerospace, Store

Business Development Manager

Ing. Pavel Drbohlav

Ing. Pavel Drbohlav

Aerospace, CAE, company management, cz, Energeticke, Store

Chief Operation Officer)

Agreement